Servo Motor Outputs
Overview
SKU: ISXSTK-SRVO-1
Connect up to six DC (4.8 – 6V DC), low current, servo motors. Requires external power for the motors, typically 5-7V DC. Can also be used with external motor drivers.
Technical Specifications
| Connector | 3 post x 12 standard low voltage servo. 6 independent channels output. 4.8-6VDC. Servo power supplied externally via DC power input |
| Processor | ARM Cortex microcontroller. 80MHz 128k Flash 32K Ram |
| Interface | Six independent pulse width modulated outputs. Can drive external drivers |
Pinout
| — | — | S1 | S2 | S3 | S4 | S5 | S6 | — | — | — | — | — | — |
| — | — | V1 | V2 | V3 | V4 | V5 | V6 | — | — | — | — | DC Motor Power IN (5-7V) | GND |
| GND | GND | GND | GND | GND | GND | GND | GND | GND | GND | GND | GND | — | — |
Additional Notes
DC (4.8 – 6V) servo motors can be purchased from many sources. See Adafruit, Sparkfun, Servocity. Manufacturers include Futaba, Towerpro, and others. Servos can typically be positioned over 180 degrees only (half rotation). Continuous rotation servo motors are also available. Servo connector plugs in vertically. For many DC servos, the orange or white wire would go to the top pin, S1.