Pressure Sensor – 100 psi

Overview

SKU: ISXSNS-PRS-1

Fluid pressure sensor for water, oil, and gas up to 100 psi, with ¼” male threads.  It is powered by 5V (from a stack) and outputs an analog signal between 0.5V and 4.5V linearly proportional to the pressure. Use with the Interstacks Analog In Universal or I/O Expander blocks.

Additional Notes

This sensor uses a 3 wire pigtail cable: 5V power (red), GND (black), and signal. The third signal wire transmits the analog output, and should be connected to an input on either the Analog In Universal or the I/O Expander block.