Power Sensor (AC) – High Current 200A

Overview

SKU: ISXSNS-PWR-1-200

Current transducer that senses AC power consumption. Sampling the power every second creates a power profile that can reveal detailed machine operations, including when it is on, off, or on-load. Maximum current 200 Amps. Analog voltage output 0-5V DC (self powered). Use with the Analog In Universal block.

Additional notes

The sensors are self-powered and so only need two wires from the sensor to the Interstacks I/O Expander or Analog In block. The black wire is GND and connects to terminal 10 (GND) of the I/O Expander or Analog In block. The other wire connects to one of the eight inputs on the I/O or Analog block.

Installation Guide

To install an inductive current sensor, a single wire (of the two or three AC power lines) must run through the donut hole. The ring snaps open so that a wire can be run through it.

Looped around a single phase in a high-voltage breaker box

Will not read correctly if looped around multiple phases in one sheath

A sacrificial extension cord can be pulled apart to access a single wire