Connecting Stacks to Cell Network
Welcome to Interstacks! This quick start guide will walk you through the process of connecting your stack to the cellular network. Before you begin, please gather the following items in a convenient location with a strong cell signal.
Before you begin
Please gather the following items in a convenient location:
Your preassembled stack and power cord
A PC or laptop with internet access
Connecting your stack
- Plug in your stack’s power supply. It takes five to ten seconds for the stack to boot up.
- The stack will automatically connect to the cell network and register its new location, indicated by the cell block LED slowly blinking orange. This may take a few minutes.
- Once connected the cell block LED will stay green, with intermittent orange flashes when it is transmitting data.
Confirm that data is flowing
Log into MyStacks.interstacks.com and confirm that data is flowing from your stack to your dashboard. If this is your first time logging in, you can follow our step-by-step tutorial on dashboard creation and adding your first data widget.
Check the sensors and accessories section for installation tips and wiring guides.
For additional technical support, please contact us at info@interstacks.com with a description of your issue.